WIRELESS
TEMPERATURE SENSOR
The temperature alert sensor detects a
temperature drop or rise. This unit works well when used in
conjunction with the dialer to monitor homes, stores,
outbuildings, etc when you are away. In the event of a
heat rise or loss the sensor will activate the dialer to
alert the proper parties. The sensor's range is from
-20 degrees to 110 degrees F and may be adjusted to the high
and low temperatures you require.
 |
WIRELESS DOOR CONTACTS |
The wireless door contacts may be mounted
on any door and will activate the dialer when the door is
opened. The contacts, which use a 9 volt battery, work well
with the dialer because they make full use of entry and exit
delay on the dialer.
 |
WIRELESS HANDHELD TRANSMITTER |
This small transmitter , which uses
a 9 volt battery, can be carried in a pocket or purse. It
can activate dialer up to 300 feet away. It may also be used
as a panic button to summon for help for those store with
limited security that operate late hours, such as
convenience stores.
SIREN
The 12 volt DC siren can be plugged into
the dialer and will sound when activated. The siren is
designed for exterior us and could be used to scare off an
intruder. 120 DB
TIMER/ LIGHT CONTROL
The timer control , when activated by our
wireless drive alert, is normally used for security reasons.
It has the ability to turn on lights, bells, horns, etc that
can be set to stay on for 2,5,10 minutes and then will shut
off automatically, or you may have the light, etc . turn on
until manually reset The control unit has an on/off switch
for use your convenience. Installation is very easy- just
connect the timer to the dry contacts on the receiver and
plug in the light. The timer control can turn on up to 250
watts of light.
LOUD RINGING BELL
This 6" bell can be used with any of the
driveway alarms. It can be used outside or inside for people
with hearing problems. When used in conjunction with the
light/timer control it may be programmed to ring up to ten
minutes.
LINE CARRIERS
These are designed to send a remote signal from one
building to another, providing that all locations are
downstream from one power transformer. Plug the transmitter
into a 110 volt outlet in one building, and throughout your
existing power lines, it will trip the receiver in another
building. The transmitter can be activated by a driveway
alarm. A loud bell or light plugged into the receiver would
be activated.
WIRELESS
PIR SENSOR